Back to Technical Support     Back to Service Bulletins

Replacing E3000 and E3100 Safety Bursting disc

(a)    To replace the Bursting Disc in the Safety Valve, unscrew and separate the pressure vessel from the stand pillar by rotating the vessel anti-clockwise relative to the base.
(b)    Unscrew and remove the top of the safety valve using appropriate sized spanners.
(c)    Remove and discard the copper ring and ruptured bursting disc from the safety valve body.
(d)    Fit a replacement Bursting Disc (E3000-052 ) and Copper Ring (E3000-053).
(e)    Re-assemble in reverse order.
(f)     Should safety valve bonded seal need replacing, part number is E3000-050 (packet of five)

Safety Valve Assembly