Back to Products Back to E3000 and E3100
E3500 Thermocirculator
|
E3500 Thermo-circulator is a low cost, portable water circulating system for supplying a constant temperature supply for closed and open loop applications at near ambient to +60°C temperature. |
Key features
- Precise control of heating
- Compact
- Robust and reliable
- No running water to waste
- Ideal for use with the Polaron E3000 / E3100 critical point dryers:
The unit is suitable for open or closed loop applications and has all controls and liquid connections on the
front panel. The temperature controller shows not only the 'set' temperature (between ambient and
+65°C) but also the actual liquid temperature. The fluid is circulated by a gland-less magnetic pump, through
an aluminium reservoir.
A cooling coil is mounted in the liquid reservoir. This coil can be directly connected to the main water supply
and is primarily used when temperature control near to ambient is required. The electronic control system features
a zero voltage switching unit which minimises mains electrical interference enabling the E3500 to be used and sited
with other sensitive electronic instruments.
Using the E3500 with Polaron Critical Point Dryers
The E3500 will give controlled heating of Polaron E3000 and E3100 Critical Point Dryers. The E3500 is connected
directly to the inlet and outlet of the E3000 or E3100 water jacket. The temperature of the circulating fluid
is pre-set, typically set to 37oC (e.g. just above the critical temperature).
Please note for heating and cooling please see E4800 heater/chillers
::
