Product Description
The K850 is fitted with thermo-electronic heating and adiabatic cooling and temperature control of +5°C cooling and +35°C during heating. This allows pre-cooling of the chamber and ensures that the critical point is accurately obtained.
The K850 is fitted with three valves: fluid inlet, flushing and a gas venting system which uses a fine needle valve to give controlled pressure let down. A built-in magnetic stirrer ensures thorough mixing of specimens with circulating fluids.
The standard specimen holder has 12 individual wells (8mm diameter x 8mm high) and allows easy exchange and transfer to and from the K850. For very small specimens CPD800A porous pots are available - see Ordering Information.
The K850 is fitted with three valves: fluid inlet, flushing and a gas venting system which uses a fine needle valve to give controlled pressure let down. A built-in magnetic stirrer ensures thorough mixing of specimens with circulating fluids.
The standard specimen holder has 12 individual wells (8mm diameter x 8mm high) and allows easy exchange and transfer to and from the K850. For very small specimens CPD800A porous pots are available - see Ordering Information.
Additional Information
| Ordering Information |
|