Cryo Preparation Systems

Quick reference

Quote Request

    I consent to Quorum Technologies collecting and storing my personal information for further marketing.I DO NOT consent to Quorum Technologies collecting and storing my personal information for further marketing.

    K775X Liquid Nitrogen Cooled Turbo-Pumped EM Freeze Dryer

    The K775X can operate at temperatures down to -140°C and uses a turbomolecular pumping unit, backed by a rotary vacuum pump.

    Key features

    • Turbomolecular pumping – for critical freeze drying applications
    • Liquid nitrogen fed cold stage – temperatures below -80oC can be achieved
    • Programmable multi-segment sequence control – 10 times and 10 temperatures for versatile automatic operation
    • Accurate time and temperature monitoring – for pre-selection of drying cycle
    • Extended warranty option

    Click here for the product brochure download

    • Product Description
    • Images
    • Ordering information
    • Additional Information
    • Downloads & Specifications

    The freeze drying method 

    Freeze drying specimen preparation reduces the distortion and shrinkage effects that occur when a wet specimen dries by normal evaporation. Distortion is due to the forces of surface tension that occur when going from a liquid to a vapour phase, such as from water to water vapour – the normal situation with biological specimens.

    The freeze drying method overcomes this problem by careful sublimation of frozen specimens under vacuum – a process that avoids the liquid phase and thereby reduces distortion effects. The rate of sublimation is a function of temperature and vacuum, with typical drying times being several hours or longer.

    To see application examples, please visit: Freeze Drying Images.

    Achieving results

    Ideally, freeze drying should be carried out at temperatures below the recrystallisation point of ice, but this would require very long drying times. In practice temperatures of -60°C have been found to give reasonable results under vacuums achievable with two-stage rotary vacuum pumps. For these applications see: K750X Peltier-Cooled EM Freeze Dryer.

    For certain applications, however, it is necessary to dry at temperatures below -80°C with lower sublimation rates for delicate specimens. This requires better vacuum than can be obtained using a rotary vacuum pump alone and the lower temperatures associated with liquid nitrogen. For such applications the K775X is recommended.

    The technique

    The K775X Freeze Dryer achieves low temperatures by using a liquid nitrogen cold stage – fed from an integral vacuum dewar which is capable of giving several hours hold-time between ‘top ups’.

    Pre-frozen specimens are loaded onto the cooled stage of the drying chamber through the lid using a specimen transfer holder, which is supplied with a convenient lock-and-locate loading tool. Two holders are provided – for TEM grids and for SEM stubs.

    The K775X has controls for time and temperature and at the end of the drying period the stage may be heated prior to specimen removal.

    The system also has facilities for purging with nitrogen gas.

    Ten-segment sequence

    A microprocessor-controlled 10-segment sequence allows 10 time periods and 10 temperature settings to be programmed to achieve a range of drying protocols. Up to 10 different protocols can be stored for future use.

    K775X Liquid Nitrogen Cooled Turbo-Pumped EM Freeze Dryer

    Rotary Pump requirements

    13034. 5 m3/hr Pfeiffer DUO 6  rotary vacuum pump with oil mist filter.


    EK4180. Stand-alone liquid nitrogen slushing chamber (requires an additional rotary pump (see: 13034).


    Weight and dimensions. 450 mm W x 350 mm D x 175 mm H. Weight: 18 kg.

    Work chamber. borosilicate glass 165 m Ø x 125 mm H.

    Safety shield. Polycarbonate cylinder.

    Timer. 0-999 hours.

    Specimen stage. -140ºC to +40ºC. Initial cool down to -140ºC in approximately 45 minutes,  final temperature can be lower.

    Temperature controller and monitor. -90ºC to +90ºC, display resolution to 0.1ºC.

    Vacuum range. 1 x 10-2 mbar to 1 x 10-5 mbar.

    Vacuum. 60 L/s built-in air cooled turbomolecular pump.

    Backing rotary pump: 50 L/m or greater

    Electrical supply. 230 V/50 Hz (6 A maximum including pump), 115 V/60 Hz (12 A maximum including pump).

    Supplied with. Vacuum hose and connectors, moisture trap and operating manual.



    Judges House, Lewes Road,
    Laughton, East Sussex.
    BN8 6BN

    +44 1323 810981


    Working Hours

    8.30 – 5.00 pm Mon – Thu
    8.30 – 1.00 pm Fri

    Latest News

    No more posts


    Follow Our Socials

    Keeping in contact with our customers via social platforms as well as traditional telephone and email.