consumables / Carbon and Sputtering Accessories

Carbon Fibre (fine strands) - 100 m
Carbon Fibre (fine strands) - 100 m

C5461-100

Convenient to use, giving thin to medium coating thickness using a single strand or several lengths. 100 m length

Quorum Q Series (if fitted with carbon fibre evaporation insert) and previous models K250X, K450X

Normally in stock

Carbon Fibre (fine strands) - 10 m
Carbon Fibre (fine strands) - 10 m

C5461-10

Convenient to use, giving thin to medium coating using a single strand or several lengths. 10 m length

Note: images shows 1 m lenght

Quorum Q Series (if fitted with carbon fibre evaporation insert) and previous models K250X, K450X

Normally in stock

Carbon Fibre (fine strands) - 1 m
Carbon Fibre (fine strands) - 1 m

C5461

Convenient to use, giving thin to medium coating using a single strand or several lengths. 1 m length

Quorum Q Series (if fitted with carbon fibre evaporation insert) and previous models K250X, K450X

Normally in stock

Carbon Fibre (woven cord) - 100 m
Carbon Fibre (woven cord) - 100 m

C5421-100

Convenient to use, giving thick coating using a single length. 100 m length

Quorum Q Series (if fitted with carbon fibre evaporation insert), SC7620 with carbon attachment and previous models K250X, K450X, CC7650 and other Polaron carbon coaters

Normally in stock

Carbon Fibre (woven cord) - 10 m
Carbon Fibre (woven cord) - 10 m

C5421-10

Convenient to use, giving thick coating using a single length. 10 m length

Note: image shows 1 m length

Quorum Q Series (if fitted with carbon fibre evaporation insert), SC7620 with carbon attachment and previous models K250X, K450X, CC7650 and other Polaron carbon coaters

Normally in stock

Carbon Fibre (woven cord) - 1 m
Carbon Fibre (woven cord) - 1 m

C5421

Convenient to use, giving thick coating using a single length. 1 m length

Quorum Q Series (if fitted with carbon fibre evaporation insert), SC7620 with carbon attachment and previous models K250X, K450X, CC7650 and other Polaron carbon coaters

Normally in stock

Carbon Rod high purity - 3.05mm x 300mm - pack of 10
Carbon Rod high purity - 3.05mm x 300mm - pack of 10

C5422

Pack of 10. Typical measured purity ppm of batch as follows: aluminium (Al) = 0.3, boron (B) = 0.1, iron (Fe) = 0.1, magnesium (Mg) = 0.1, silicon (Si) = 0.3. This grade does not exceed total maximum allowable spot impurities per element of 1ppm. With 5 ppm total maximum allowable spot impurities

K950X, plus all makes and models using 3.05 mm carbon rods

Normally in stock

Manual Carbon Rod Shaper for 3mm carbon rods
Manual Carbon Rod Shaper for 3mm carbon rods

S8651

Manual tool for shaping 3.05 mm carbon rods

Quorum Technologies carbon evaporators

5 days

Manual Carbon Rod Shaper for 6mm carbon rods
Manual Carbon Rod Shaper for 6mm carbon rods

S8650

Manual tool for shaping 6.15 mm carbon rods

Quorum Technologies carbon evaporators

5 days

Carbon Rod high purity - 6.15mm x 100mm - pack of 10
Carbon Rod high purity - 6.15mm x 100mm - pack of 10

A0830A

Manual tool for shaping 6.15 mm carbon rods

Quorum Technologies carbon evaporators

5 days