Biomaterials & Nanomaterials

MoS₂ 2D materials induce spinal cord neuroinflammation and neurotoxicity affecting locomotor performance in zebrafish
Nanoscale Horizons
pp3010
Villi Inspired Mechanical Interlocking for Intestinal Retentive Devices
Advanced Science
q300td
Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue
International Journal of Smart and Nano Materials
k850
3D Printing of Resilin in Water by Multiphoton Absorption Polymerization
Advanced Functional Materials
k850
Energy resolved-electrochemical impedance spectroscopy investigation of the role of Al-doped ZnO nanoparticles in electronic structure modification of polymer nanocomposite LEDs
Materials & Design
q300tt
Complex Assemblies of Colloidal Microparticles with Compliant DNA Linkers and Magnetic Actuation
Advanced Materials Technologies
q300td
Optical assessment of lignin-containing nanocellulose films under extended sunlight exposure
Cellulose
q150vsq150veq150ves
Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids
Biomaterials
q300td
Superhydrophilic and underwater superoleophobic Graphene oxide-Phytic acid membranes for efficient separation of oil-in-water emulsions
Separation and Purification Technology
q150rsq150req150res
Enhanced production of bacterial cellulose with a mesh dispenser vessel-based bioreactor
Cellulose
q150vsq150veq150ves
Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers
ACS Nano
q300tt
Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction
Electrochimica Acta
e3100
Comparison of the hemocompatibility of neurovascular flow diverters with anti-thrombogenic coatings
Journal of Science: Advanced Materials and Devices
e3100
Antibiotic TMA (Therapeutic Methacrylic) Comonomers: Synergizing Mechanical Integrity with Infection Control in Bone Cement
Advanced Functional Materials
q300td
Transient shuttle for a widespread neural probe with minimal perturbation
npj Flexible Electronics
q300td
Engineering Biofouling Resistant Materials Through the Systematic Adaptation of Surface Morphology
Advanced Materials Interfaces
k850
Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury
Biomaterials Advances
q150rsq150req150res
Scaffolds Based on Silk Fibroin with Decellularized Rat Liver Microparticles: Investigation of the Structure, Biological Properties and Regenerative Potential for Skin Wound Healing
Pharmaceutics
k850q150rsq150req150res
Revival of Polyacetylenes in Electronics: Green Light-Emitting Diodes
Macromolecules
q300tt
Poly(D,L-lactide-co-glycolide) particles are metabolised by the gut microbiome and elevate short chain fatty acids
Journal of Controlled Release
q150rsq150req150res
Surface biofunctional bFGF-loaded electrospun suture accelerates incisional wound healing
Materials & Design
e3100
Incorporation of porous protective layers as a strategy to improve mechanical stability of Tamm plasmon based detectors
Materials Advances
q300td
Vivid Structural Coloration in Transparent MXene-Cellulose Nanocrystals Composite Films
Advanced Functional Materials
q150vsq150veq150ves
Electrically-responsive antimicrobial coatings based on a tetracycline-loaded poly(3,4-ethylenedioxythiophene) matrix
Materials Science and Engineering: C
q150rsq150req150res
Bioprinting microporous functional living materials from protein-based core-shell microgels
Nature Communications
e3100
Magnetic-actuated “capillary container” for versatile three-dimensional fluid interface manipulation
Science Advances
k850
High-temperature fracture behaviour of layered alumina ceramics with textured microstructure
Journal of the European Ceramic Society
q150vsq150veq150ves
Enzymatic hydrolysis of palm cellulose to yield nanocrystals with potential roles in lipid and cholesterol digestion and absorption
Cellulose
q150rsq150req150res
Collagen-Tannic Acid Spheroids for β-Cell Encapsulation Fabricated Using a 3D Bioprinter
Advanced Materials Technologies
k850
Metal 3D nanoprinting with coupled fields
Nature Communications
q300td
Quality of cellulose and biostimulant extracts from Oedogonium calcareum cultivated during primary wastewater treatment
Bioresource Technology
q150vsq150veq150ves
Magnetically Driven Hydrogel Surfaces for Modulating Macrophage Behavior
ACS Biomaterials Science & Engineering
q300td

Biomaterials & Nanomaterials

MoS₂ 2D materials induce spinal cord neuroinflammation and neurotoxicity affecting locomotor performance in zebrafish

Villi Inspired Mechanical Interlocking for Intestinal Retentive Devices

Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue

3D Printing of Resilin in Water by Multiphoton Absorption Polymerization

Energy resolved-electrochemical impedance spectroscopy investigation of the role of Al-doped ZnO nanoparticles in electronic structure modification of polymer nanocomposite LEDs

Complex Assemblies of Colloidal Microparticles with Compliant DNA Linkers and Magnetic Actuation

Optical assessment of lignin-containing nanocellulose films under extended sunlight exposure

Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids

Superhydrophilic and underwater superoleophobic Graphene oxide-Phytic acid membranes for efficient separation of oil-in-water emulsions

Enhanced production of bacterial cellulose with a mesh dispenser vessel-based bioreactor

Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers

Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction

Comparison of the hemocompatibility of neurovascular flow diverters with anti-thrombogenic coatings

Antibiotic TMA (Therapeutic Methacrylic) Comonomers: Synergizing Mechanical Integrity with Infection Control in Bone Cement

Transient shuttle for a widespread neural probe with minimal perturbation

Engineering Biofouling Resistant Materials Through the Systematic Adaptation of Surface Morphology

Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury

Scaffolds Based on Silk Fibroin with Decellularized Rat Liver Microparticles: Investigation of the Structure, Biological Properties and Regenerative Potential for Skin Wound Healing

Revival of Polyacetylenes in Electronics: Green Light-Emitting Diodes

Poly(D,L-lactide-co-glycolide) particles are metabolised by the gut microbiome and elevate short chain fatty acids

Surface biofunctional bFGF-loaded electrospun suture accelerates incisional wound healing

Incorporation of porous protective layers as a strategy to improve mechanical stability of Tamm plasmon based detectors

Vivid Structural Coloration in Transparent MXene-Cellulose Nanocrystals Composite Films

Electrically-responsive antimicrobial coatings based on a tetracycline-loaded poly(3,4-ethylenedioxythiophene) matrix

Bioprinting microporous functional living materials from protein-based core-shell microgels

Magnetic-actuated “capillary container” for versatile three-dimensional fluid interface manipulation

High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

Enzymatic hydrolysis of palm cellulose to yield nanocrystals with potential roles in lipid and cholesterol digestion and absorption

Collagen-Tannic Acid Spheroids for β-Cell Encapsulation Fabricated Using a 3D Bioprinter

Metal 3D nanoprinting with coupled fields

Quality of cellulose and biostimulant extracts from Oedogonium calcareum cultivated during primary wastewater treatment

Magnetically Driven Hydrogel Surfaces for Modulating Macrophage Behavior