Polymers & Gels

Giant Response and Selectivity of Hansen Solubility Parameters-Based Graphene-SBS Co-Polymer Matrix Composite Room Temperature Sensor to Organic Vapours
Polymers
q300tt
Dynamic bacterial growth modulation in structurally distinct and functionally tuneable agarose hydrogels
Communications Materials
pp3010
High-purity DEP-based multitarget separation of particles in a converging microchannel
Journal of the Taiwan Institute of Chemical Engineers
q300tt
Supramolecular Conductive Hydrogels With Homogeneous Ionic and Electronic Transport
Advanced Materials
pp3010
Enhanced Graphene Oxide Electrical Properties for Thin-Film Electronics Using an Active/Shrinkable Substrate
ACS Omega
q300tt
Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer
Materials
q300tt
Bio-based polymer composites obtained by vat photopolymerization of photocurable resins modified with biochar as sustainable filler
Composites Part A: Applied Science and Manufacturing
q150ts
Insights into the quasi-static mechanics of transversely isotropic polymer foams
Materials & Design
q150tes
Time-evolved growth of semi-aromatic polyamide nanofilms and their structure-performance relationship: Mechanistic insights and implications for nanofiltration membrane synthesis
Journal of Membrane Science
q150tes
Surface-induced stability change of bioengineered antibodies: Insights from QCM-D and neutron reflection
Journal of Colloid and Interface Science
q150ts
AI-based nanotopography of dental adhesives containing TiO₂ nanoparticles with enhanced antibacterial and mechanical properties
Colloids and Surfaces A: Physicochemical and Engineering Aspects
q150ts
Concentric ice-templating of ultracompressible tough hydrogels with bioinspired circumferentially aligned architecture
Science Advances
q150tes
Unveiling the crucial morphological effect of non-conducting polymer binders on inorganic-rich hybrid electrolytes
Journal of Materials Chemistry A
pp3010
Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue
International Journal of Smart and Nano Materials
k850
3D Printing of Resilin in Water by Multiphoton Absorption Polymerization
Advanced Functional Materials
k850
Energy resolved-electrochemical impedance spectroscopy investigation of the role of Al-doped ZnO nanoparticles in electronic structure modification of polymer nanocomposite LEDs
Materials & Design
q300tt
On the geometry and material stability of tubular PVDF-TiO2 static mixer membrane contactors for photocatalytic ozonation of micropollutants
Journal of Membrane Science
q300tt
Interactions between interfaces dictate stimuli-responsive emulsion behaviour
Nature Communications
pp3010
Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids
Biomaterials
q300td
Magnetically boosted 1D photoactive microswarm for COVID-19 face mask disruption
Nature Communications
pp3010
Radiant air-conditioning with infrared transparent polyethylene aerogel
Materials Today Energy
e3100
Liquid metal interface mechanochemistry disentangles energy density and biaxial stretchability tradeoff in composite capacitor film
Nature Communications
q300td
Metal-doped carbons from polyurea-crosslinked alginate aerogel beads
Materials Advances
e3100
Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers
ACS Nano
q300tt
Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction
Electrochimica Acta
e3100
Engineering Biofouling Resistant Materials Through the Systematic Adaptation of Surface Morphology
Advanced Materials Interfaces
k850
Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury
Biomaterials Advances
q150rsq150req150res
Stretchable, transparent and multifunctional PVC-gel heater: a novel approach to skin-mountable, wearable thermal devices
npj Flexible Electronics
q300tt
Scaffolds Based on Silk Fibroin with Decellularized Rat Liver Microparticles: Investigation of the Structure, Biological Properties and Regenerative Potential for Skin Wound Healing
Pharmaceutics
k850q150rsq150req150res
Revival of Polyacetylenes in Electronics: Green Light-Emitting Diodes
Macromolecules
q300tt
Microspheres as a stabilizing element in polyurethane-cork composites
Construction and Building Materials
q150rsq150req150res
Poly(D,L-lactide-co-glycolide) particles are metabolised by the gut microbiome and elevate short chain fatty acids
Journal of Controlled Release
q150rsq150req150res
Surface biofunctional bFGF-loaded electrospun suture accelerates incisional wound healing
Materials & Design
e3100
Electrically-responsive antimicrobial coatings based on a tetracycline-loaded poly(3,4-ethylenedioxythiophene) matrix
Materials Science and Engineering: C
q150rsq150req150res
Bioprinting microporous functional living materials from protein-based core-shell microgels
Nature Communications
e3100
Modulating proton conductivity through crystal structure tuning in arenedisulfonate coordination polymers
Journal of Materials Chemistry A
pp3010
Magnetic-actuated “capillary container” for versatile three-dimensional fluid interface manipulation
Science Advances
k850
Soft micron-sized polypeptide microgels: preparation, crosslink density, topography and nanomechanics in swollen state
Materials Advances
pp3010
Recyclable hemp hurd fibre-reinforced PLA composites for 3D printing
Journal of Materials Research and Technology
q150vsq150veq150ves
New insights into pure zwitterionic hydrogels with high strength and high toughness
Materials Horizon
pp3010
Collagen-Tannic Acid Spheroids for β-Cell Encapsulation Fabricated Using a 3D Bioprinter
Advanced Materials Technologies
k850
Organic–Inorganic Multilayer Microcarriers with Superior Mechanical Properties for Potential Active Delivery in Fast-Moving Consumer Goods
Materials and Interfaces
pp3010
The effects of alkaline digestion, bleaching and ultrasonication treatment of fibre on 3D printed harakeke fibre reinforced polylactic acid composites
Composites Part A: Applied Science and Manufacturing
q150vsq150veq150ves
Magnetically Driven Hydrogel Surfaces for Modulating Macrophage Behavior
ACS Biomaterials Science & Engineering
q300td

Polymers & Gels

Giant Response and Selectivity of Hansen Solubility Parameters-Based Graphene-SBS Co-Polymer Matrix Composite Room Temperature Sensor to Organic Vapours

Dynamic bacterial growth modulation in structurally distinct and functionally tuneable agarose hydrogels

High-purity DEP-based multitarget separation of particles in a converging microchannel

Supramolecular Conductive Hydrogels With Homogeneous Ionic and Electronic Transport

Enhanced Graphene Oxide Electrical Properties for Thin-Film Electronics Using an Active/Shrinkable Substrate

Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer

Bio-based polymer composites obtained by vat photopolymerization of photocurable resins modified with biochar as sustainable filler

Insights into the quasi-static mechanics of transversely isotropic polymer foams

Time-evolved growth of semi-aromatic polyamide nanofilms and their structure-performance relationship: Mechanistic insights and implications for nanofiltration membrane synthesis

Surface-induced stability change of bioengineered antibodies: Insights from QCM-D and neutron reflection

AI-based nanotopography of dental adhesives containing TiO₂ nanoparticles with enhanced antibacterial and mechanical properties

Concentric ice-templating of ultracompressible tough hydrogels with bioinspired circumferentially aligned architecture

Unveiling the crucial morphological effect of non-conducting polymer binders on inorganic-rich hybrid electrolytes

Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue

3D Printing of Resilin in Water by Multiphoton Absorption Polymerization

Energy resolved-electrochemical impedance spectroscopy investigation of the role of Al-doped ZnO nanoparticles in electronic structure modification of polymer nanocomposite LEDs

On the geometry and material stability of tubular PVDF-TiO2 static mixer membrane contactors for photocatalytic ozonation of micropollutants

Interactions between interfaces dictate stimuli-responsive emulsion behaviour

Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids

Magnetically boosted 1D photoactive microswarm for COVID-19 face mask disruption

Radiant air-conditioning with infrared transparent polyethylene aerogel

Liquid metal interface mechanochemistry disentangles energy density and biaxial stretchability tradeoff in composite capacitor film

Metal-doped carbons from polyurea-crosslinked alginate aerogel beads

Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers

Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction

Engineering Biofouling Resistant Materials Through the Systematic Adaptation of Surface Morphology

Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury

Stretchable, transparent and multifunctional PVC-gel heater: a novel approach to skin-mountable, wearable thermal devices

Scaffolds Based on Silk Fibroin with Decellularized Rat Liver Microparticles: Investigation of the Structure, Biological Properties and Regenerative Potential for Skin Wound Healing

Revival of Polyacetylenes in Electronics: Green Light-Emitting Diodes

Microspheres as a stabilizing element in polyurethane-cork composites

Poly(D,L-lactide-co-glycolide) particles are metabolised by the gut microbiome and elevate short chain fatty acids

Surface biofunctional bFGF-loaded electrospun suture accelerates incisional wound healing

Electrically-responsive antimicrobial coatings based on a tetracycline-loaded poly(3,4-ethylenedioxythiophene) matrix

Bioprinting microporous functional living materials from protein-based core-shell microgels

Modulating proton conductivity through crystal structure tuning in arenedisulfonate coordination polymers

Magnetic-actuated “capillary container” for versatile three-dimensional fluid interface manipulation

Soft micron-sized polypeptide microgels: preparation, crosslink density, topography and nanomechanics in swollen state

Recyclable hemp hurd fibre-reinforced PLA composites for 3D printing

New insights into pure zwitterionic hydrogels with high strength and high toughness

Collagen-Tannic Acid Spheroids for β-Cell Encapsulation Fabricated Using a 3D Bioprinter

Organic–Inorganic Multilayer Microcarriers with Superior Mechanical Properties for Potential Active Delivery in Fast-Moving Consumer Goods

The effects of alkaline digestion, bleaching and ultrasonication treatment of fibre on 3D printed harakeke fibre reinforced polylactic acid composites

Magnetically Driven Hydrogel Surfaces for Modulating Macrophage Behavior

Polymers & Gels

Giant Response and Selectivity of Hansen Solubility Parameters-Based Graphene-SBS Co-Polymer Matrix Composite Room Temperature Sensor to Organic Vapours

Dynamic bacterial growth modulation in structurally distinct and functionally tuneable agarose hydrogels

High-purity DEP-based multitarget separation of particles in a converging microchannel

Supramolecular Conductive Hydrogels With Homogeneous Ionic and Electronic Transport

Enhanced Graphene Oxide Electrical Properties for Thin-Film Electronics Using an Active/Shrinkable Substrate

Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer

Bio-based polymer composites obtained by vat photopolymerization of photocurable resins modified with biochar as sustainable filler

Insights into the quasi-static mechanics of transversely isotropic polymer foams

Time-evolved growth of semi-aromatic polyamide nanofilms and their structure-performance relationship: Mechanistic insights and implications for nanofiltration membrane synthesis

Surface-induced stability change of bioengineered antibodies: Insights from QCM-D and neutron reflection

AI-based nanotopography of dental adhesives containing TiO₂ nanoparticles with enhanced antibacterial and mechanical properties

Concentric ice-templating of ultracompressible tough hydrogels with bioinspired circumferentially aligned architecture

Unveiling the crucial morphological effect of non-conducting polymer binders on inorganic-rich hybrid electrolytes

Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue

3D Printing of Resilin in Water by Multiphoton Absorption Polymerization

Energy resolved-electrochemical impedance spectroscopy investigation of the role of Al-doped ZnO nanoparticles in electronic structure modification of polymer nanocomposite LEDs

On the geometry and material stability of tubular PVDF-TiO2 static mixer membrane contactors for photocatalytic ozonation of micropollutants

Interactions between interfaces dictate stimuli-responsive emulsion behaviour

Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids

Magnetically boosted 1D photoactive microswarm for COVID-19 face mask disruption

Radiant air-conditioning with infrared transparent polyethylene aerogel

Liquid metal interface mechanochemistry disentangles energy density and biaxial stretchability tradeoff in composite capacitor film

Metal-doped carbons from polyurea-crosslinked alginate aerogel beads

Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers

Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction

Engineering Biofouling Resistant Materials Through the Systematic Adaptation of Surface Morphology

Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury

Stretchable, transparent and multifunctional PVC-gel heater: a novel approach to skin-mountable, wearable thermal devices

Scaffolds Based on Silk Fibroin with Decellularized Rat Liver Microparticles: Investigation of the Structure, Biological Properties and Regenerative Potential for Skin Wound Healing

Revival of Polyacetylenes in Electronics: Green Light-Emitting Diodes

Microspheres as a stabilizing element in polyurethane-cork composites

Poly(D,L-lactide-co-glycolide) particles are metabolised by the gut microbiome and elevate short chain fatty acids

Surface biofunctional bFGF-loaded electrospun suture accelerates incisional wound healing

Electrically-responsive antimicrobial coatings based on a tetracycline-loaded poly(3,4-ethylenedioxythiophene) matrix